250 Watt Stand Alone

  

 

Data Sheet

 

Product Approvals

 

Features

 

·     17 pre-installed tones

·     10 pre-installed speech messages

·     Optional customer message module for 2 custom messages

·     PA Microphone

·     Inputs for Lock-down, Chime, Test and False Alarm speech messages

·     Ability to synchronise tones & messages with additional OWS Amplifiers

·     Fault monitoring of the 100V speaker lines

·     2-wire connection to Fire Panel

·     Background music & PA analogue audio inputs

·     Pre-installed test tones for ease of installation

Description

 

The FireSense EVAC-250W, 250 Watt Building Occupant Warning System is designed for use with fire alarm installations that require the addition of an OWS amplifier to meet code requirements.

 

The 250 Watt amplifier is Mains powered so requires minimal current consumption from the fire panels power supply however in the event of mains failure the battery capacity must be allowed to run the 250watt Amp.

An OWS-DISP-MIC is also required to provide the Controls, Display & PA MIC and is mounted on a single annunciator plate. This is not required for slave amplifiers.

 

The EVAC-250W comes standard with a comprehensive range of tones and pre installed speech messages and has the option of fitting as OWS-CMM-2 if you need to record a custom message.

 

The 100v Speaker line is monitored for open and short circuits as standard and can be expanded to monitor multiple speaker feeds from one amplifier with the option of fitting either an OWS-PCB-980 or an OWS-SDM-4.