The 2600 Series Fire Suppression Control Panel uses the proven IFS-2600 Fire Indicator Panel coupled with one or more NIFS-2008 Fire Suppression Control Modules to provide a sophisticated yet flexible answer to suppression discharge requirements. 

The system has been designed and built to comply with Australian Standards including AS4214 and AS4428. 

The system can be used as either single or dual risk. The dual risk can be any two of three inputs for discharge of the gas. Adjustable time delays between second stage alarms and gas release are provided. 

The NIFS 2008 Fire Suppression Control Module includes a maintenance gas isolate switch which will prevent the gas from being discharged manually or automatically during scheduled maintenance or service of the system. 

All of the inputs, and the warning sign and gas firing lines are fault monitored to ensure that system integrity is ensured at all times, thus resulting in lowered risk to critical equipment or processes.

Provisions have been made for the connection of remote "Stop/Start Gas Stations". These stations can be used to manually release the gas in the case of emergency.

Isolation buttons are provided to prevent automatic gas release from the zone inputs, or to disable the manual release on the same unit. Manual releases on other "Stop/Start Gas Stations" are not affected by the status of isolation switches on other units.